Table of Contents
Advertisement
Semi-permanent installation
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be
installed semi-permanently (Fig. E).
Proceed as follows:
• Drill a hole ø 5,25 inches (134 mm) in an
outside wall or through a window pane.
Respect the dimensions and height of the
hole given in figure F and G.
in the
in the
window
wooden
pane
kickboard
of a
French
window
F
"As special tools are required for installa-
tion, we suggest you have the applian-
ce installed by specialized personnel."
6
E
in the wall:
you are
recommended
to insulate the
section of wall
using suitable
insulation.
• Fit the wall flange (10) into the hole.
• Fit the air exhaust hose (11) in the rele-
vant housing located on the rear side of
the appliance. (fig. A page 5).
• Fit the end of the hose (11) to the wall
flange (10) as shown in fig. G.
When the hose (11) is not connected, the dril-
led hole can be closed with the flange cap
(10).
NOTE: When installing the air conditioner
semi-permanently, you should leave a door
slightly open little as
antee correct ventilation and room pressure.
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
G
1/2 " (1 cm) to guar-
Hide quick links:
Advertisement
Table of Contents
