Dell 6100 Installation And Troubleshooting Manual page 138

Table C-1. System-Board Jumper and Switch Settings (continued)
Jumper/Switch
FLOPPY 0
FLOPPY 1
VIDEO SLEEP
PWR CTRL
RESERVED
*
Only one of these jumpers should have a jumper plug installed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviation and acronym list.
jumpered
C-4 Dell PowerEdge 6100/200 System Installation and Troubleshooting Guide
Setting
(Dell
default)
(Dell
default)
(default)
(default)
unjumpered
Description
Enables 1.44-MB diskette drive size or autodetec-
tion. Disables 2.88-MB size detection.
Enables forced 2.88-MB diskette drive size
detection.
Enables 1.44-MB diskette drive size or autodetec-
tion. Disables 2.88-MB size detection.
Enables forced 2.88-MB diskette drive size
detection.
The Video Sleep Register resides at 03C3H.
The Video Sleep Register resides at 46E8H.
Disables the RTC power supply control.
Enables power supply control using the RTC.
Reserved (do not change).