When installing SIMMs, follow these guidelines:
•
Install the SIMM with the pin 1 end aligned with the
pin 1 end of the socket (see Figure 8-5).
•
Install a SIMM in socket J1 before socket J2, socket
J2 before socket J3, and so on.
•
All SIMMs in one bank must be the same size and
speed, but SIMMs in bank 1 may differ in size from
those in bank 2.
Total
Desired
Memory
64 MB
128 MB
128 MB
256 MB
256 MB
256 MB
384 MB
384 MB
512 MB
512 MB
512 MB
640 MB
640 MB
768 MB
768 MB
1 GB
1 GB
1152 MB
8-6
Dell PowerEdge 6100/200 System Installation and Troubleshooting Guide
Table 8-1. Sample SIMM Configurations
Bank 1
J1 to J4
J5 to J8
16 MB
None
32 MB
None
16 MB
16 MB
16 MB
16 MB
64 MB
None
32 MB
32 MB
16 MB
16 MB
32 MB
32 MB
32 MB
32 MB
64 MB
64 MB
128 MB
None
16 MB
16 MB
64 MB
64 MB
64 MB
64 MB
32 MB
32 MB
64 MB
64 MB
128 MB
128 MB
16 MB
16 MB
•
SIMMs must be installed in groups of four, eight, or
16 only.
The following SIMM interleaving is supported:
•
Two-way interleaved using J1 to J4
•
Four-way interleaved, single bank using J1 to J8
•
Four-way interleaved, dual bank using J1 to J16
Table 8-1 illustrates the possible memory configurations
based on these guidelines.
SIMMs Installed in Sockets
J9 to J12
None
None
None
16 MB
None
None
32 MB
16 MB
32 MB
None
None
64 MB
16 MB
32 MB
64 MB
64 MB
None
128 MB
Bank 2
J13 to J16
None
None
None
16 MB
None
None
32 MB
16 MB
32 MB
None
None
64 MB
16 MB
32 MB
64 MB
64 MB
None
128 MB