Dispenser - LG LSSB2791ST Service Manual

Hide thumbs Also See for LSSB2791ST:

Table of Contents

HOW TO DISASSEMBLE AND ASSEMBLE

5. HANDLE

1) HANDLE REMOVAL

•To move the refrigerator through

a house door, it may be necessary

to remove the refrigerator door handles.

Note : •Handle appearance may vary from

illustrations on this page.

Mounting

Fasteners

Set Screw

Allen Wrench

•Loosen the set screws with a 2.5mm (3/32")

Allen wrench and remove the handle.

Note : •If the handle mounting fasteners need to

be tightened or removed, use a 1/4"

Allen wrench.

2) HANDLE REINSTALLATION

Mounting

Fasteners

•Place the handle on the door by aligning

handle footprints to fit mounting fasteners

and tighten the set screws with a

2.5mm (3/32" ) Allen wrench.

Note : •If the handle mounting fasteners need to

be tightened or removed, use a 1/4"

Allen wrench.

6-1. DISPENSER DISPLAY

1) As below picture, separate part ① from unit and Pull part ②

②

①

2) Separate housings and remember the pair to prevent

Miss assembly.

3) Loosen two screws pointed in red, separate one housing,

separate water-supply-pipe from hook.

Table of Contents