LG LSSB2791ST Service Manual page 58

HOW TO DISASSEMBLE AND ASSEMBLE
4-2. R - Door, adjustment of level difference
of right and left.
1) Remove the top cover. See the previous page.
2) Remove the Machine cover. See the previous page.
3) Loosen 4 bolts 4 or 5 times counterclockwise.
Do not loosen bolts marked in yellow
CAUTION - Use small driver, Ratchet or vox wrench.
3) Use adjust bolt to adjust level difference.
Adjust Bolt
4) After step 3), tighten 4 bolts at R - Upper Hinge.
Bolt
58
4-3. Door hinge damper
1) Pull out the refrigerator from the installation.
2) Open the door fully. (130。 )
3) Remove white cable tie of guide stopper.
4) Pull out the guide stopper completely.
5) Open the door at 60。And then remove / change
white colored damper.
NOTE - It is easy to remove when door opened 60。
6) Open the door fully. (130。 )
7) Assemble Guide stopper.
Fasten guide - stopper and hinge by using cable tie.
NOTE - Working space is small, and the work surface is
narrow. so, should be wearing gloves.