LG LSSB2791ST Service Manual page 55

HOW TO DISASSEMBLE AND ASSEMBLE
1. Top Cover
1) Remove 2 screws located at upper side of top cover.
2) Be caution of hanger and remove the top cover upward.
Hook
2-1. Top Decor
1) Remove top cover
2) Remove 2 screws below and remove the Top Decor.
2-2. Machine Cover
1) Remove top cover
2) Remove the screw located on the edge of the cover.
3) Remove direction of red arrow.
2-3. Case Decor
1) Remove top cover
2) Remove 2 screws below and remove the Decor case.
CAUTION - Deco case of the connecting lines are connected
to the sensor, so please carefully separated.
2-4. PCB Cover
1) Remove the top cover
2) Remove the Top decor.
3) Remove the Case Decor.
4) Remove the ground.
5) After removing PCB Cover Screw, remove the cover.
55