PS/2 Mouse
Setting
to
PS/2 MOUSE
ENABLED
installed PS/2 mouse to function. Disabling
frees interrupt request (IRQ) 12, but also prevents any
installed PS/2 mouse from functioning.
configuration options and system data
key functions
Figure 4-4. Security Menu of the System Setup Program
Supervisor Password Is
This category displays whether the supervisor password
is disabled or enabled. When
supervisor password has already been set and is required
in order to have full access (see Table 4-2) to the System
Setup program. The default is
(the default) allows an
PS/2 MOUSE
is displayed, the
ENABLED
.
DISABLED
S
ecurity Menu Categories
To access the Security menu (see Figure 4-4), use the
arrow keys to highlight Security. This section
explains in detail the System Setup categories in the
Security menu.
title box
User Password Is
This category displays whether the user password is dis-
abled or enabled. When
password has already been set and is required at boot up.
Unlike the supervisor password, the user password does
not allow you full access (see Table 4-2) to the System
Setup program. The default is
Using the System Setup Program
help
<
>
ENTER
is displayed, the user
ENABLED
.
DISABLED
4-9