Before You Begin; Important Safety Information; Kit Restrictions; Rack Stabilizer Feet - Dell 4200 Installation Manual

1-2 Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
8-32 x 0.5-inch hex-head,
thread-forming screws (4)

Figure 1-1. Tower Kit Contents

Before You Begin

Before you begin removing your system from the rack, carefully read the safety
precautions and tool requirements in the following sections.

Important Safety Information

Follow these safety precautions when removing your system from the rack.

Kit Restrictions

This tower kit is intended to be installed by trained service technicians.

Rack Stabilizer Feet

WARNING: Removing PowerEdge systems from a Dell rack without the
front and side stabilizer feet installed could cause the rack to tip over,
potentially resulting in bodily injury under certain circumstances.
Therefore, always install the stabilizer feet before removing components
from the rack.
rubber feet (4)
plastic filler plugs (18)