Installation Guide - Dell 4200 Installation Manual

support.dell.com
Dell™ PowerEdge™ 4x00 and
6300 Systems Tower

Installation Guide

This installation guide provides instructions for trained service technicians converting
one or more Dell PowerEdge 4x00 or 6300 rack-mounted computer systems into a
tower configuration.
WARNING: The power supplies in this computer system produce high
voltages and energy hazards, which can cause bodily harm. Only
trained service technicians are authorized to perform this procedure,
which includes removing the system cover and accessing the components
inside the system.
One tower kit is required for each system you are converting to the tower
configuration. The tower kit includes the following items (see Figure 1-1):
•
Four rubber feet
•
18 plastic filler plugs
•
Four 8-32 x 0.5-inch hex-head, thread-forming screws
NOTE: The nonmetric screws called out in illustrations and referenced in procedural
steps are identified first by size and then by the number of threads per inch. For
example, a #8 Phillips-head screw with 32 threads per inch is identified as an
8-32 screw.
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide 1-1