Attaching Cables And Turning The System On - Dell 4200 Installation Manual
Dell poweredge 4200 servers: installation guide
Hide thumbs
Also See for 4200:
- Installation and troubleshooting manual (154 pages) ,
- User manual (132 pages) ,
- Solution manual (114 pages)
Table of Contents
Advertisement
support.dell.com
Attaching Cables and Turning the System On
To attach the power and I/O cables and turn the system on, perform these steps:
1.
Connect the I/O cables to their connectors on the back of the system.
2.
Connect the power cable to the back of the system.
3.
Plug the other end of the power cable into an AC receptacle of the proper current
rating.
4.
Turn on the system and all attached peripherals.
5.
Ensure that the power-on self-test (POST) successfully completes and that the
operating system boots.
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
1-17
Advertisement
Table of Contents
