Falltech DuraTech 45' 3-Way Retrieval SRL-R User Instruction Manual page 15

7.3 Inspection Frequency: Inspection by a competent person at regular intervals is required. The competent person will use the
information in Table 2: SRD Inspection Recommendations, to determine the inspection frequency. Use Table 2 to determine the inspection
frequency. Inspection by a factory authorized inspection entity at regular intervals is also required.
Type of Use
Infrequent to
Light Use
Moderate to
Heavy Use
Severe to
Continuous
Use
7.4 Inspection Results: If an inspection reveals defects in or damage to the equipment, inadequate maintenance or activated fall
indicators, remove the equipment from service.
MCS03 Rev B
Table 2 - Recommended Inspection Frequency
Application Examples
Good storage conditions, indoor or infre-
Rescue and confined space,
quent outdoor use, room temperature, clean
factory maintenance
Transportation, Fair storage conditions, indoor and extended
residential construction, outdoor use, all temperatures, clean or dusty
utilities, warehouse
Harsh storage conditions, prolonged or
Commercial
construction, oil and gas,
outdoor use, all temperatures, dirty environ-
mining, foundry
Example Conditions of Use
environments
environments
continuous
ments
050120
Competent
Person
Worker Inspection
Inspection
Frequency
Frequency
Before each use Annually
Semi-annually to
Before each use
annually
Quarterly to
Before each use
semi-annually
15