Installing The Ce Decal - Toro Groundsmaster 3505-D Operator's Manual

1. Negative (–) battery cable
Important:
If you ever remove the battery,
install the battery-clamp bolts with the bolt
heads positioned on the bottom side and
the nuts on the top side. If the clamp bolts
are reversed, they may interfere with the
hydraulic tubes when shifting the cutting
units.
9. Coat both battery connections with Grafo 112X
(skin over) grease (Toro Part No. 505-47),
petroleum jelly, or light grease to prevent
corrosion.
10. Slide the rubber boot over the positive terminal
to prevent a possible short from occurring.
11. Install the battery cover.
2

Installing the CE Decal

Parts needed for this procedure:
1 Safety decal
1 Production year decal
1 CE Mark decal
Procedure
If this machine will be used for CE, affix the
CE-warning decal over the corresponding English
warning decal.
Figure 4
2. Positive (+) battery cable
g031568
1. CE warning decal
If this machine will be used for CE, affix the production
year decal and CE mark decal next to the serial plate
(Figure 6).
1. Serial plate
2. CE mark decal
12
Figure 5
Figure 6
3. Production year decal
g278676
g278675