Replacing A Microprocessor And Heat-Sink - Dell PowerEdge 1550 Information Update

1-2 Systems Information Update
3. If the test is successful, remove the two DIMMs remaining in the system and
install the other two DIMMs.
If the test is not successful, the Dell Diagnostics identifies the defective DIMM.
4. Replace the defective DIMM and rerun the Dell Diagnostics.
Corrected Orientation of Heat-Sink Clip
in Figure
Figure 8-8 in the Dell PowerEdge 1550 and Dell PowerApp 120 Systems Installation
and Troubleshooting Guide incorrectly depicted the orientation of the heat-sink clip. In
the figure below, the heat-sink clip is oriented correctly.
ZIF socket
ZIF socket tabs (2)

Replacing a Microprocessor and Heat-Sink

heat-sink clip
heat sink
microprocessor
ZIF socket
release lever