Switching The Headset On Or Off - Dell BH200 Owner's Manual

NOTE:
Charge the headset for approximately 3 hours. The Power
LED is red when charging and changes to green when charging is
complete.

Switching the Headset On or Off

To switch on:
Press and hold the Multi-function key for 3 seconds until the Blue
LED stays on ("DU"-"LO" tone will also sound).
To switch off:
Press and hold the Multi-function key for 3 seconds until the Blue
LED goes off (single beep will also sound).
Template Last Updated - 10/13/2005
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 2 / 1 5 / 0 7 – F O R P R O O F O N LY
echnical Documentation\Dell Headset\User Guide\4-75x4-
75section2_prep.fm
15