Omega ODW101W Instruction Manual page 19

Maintenance and Cleaning
NOTE: If do it from step1 to step 3, the filter system will be removed; while if do it from Step 3 to Step 1,
a the filter system will be installed.
- Inspect the filters for blocking after every time the dishwasher has been used.
- By unscrewing the coarse filter, you can remove the filter system.Remove any food remnants and
clean the filters under running water.
Cleaning The Filter
To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in
the figures on the last page and reinsert the entire assembly in the dishwasher, positioning in its seat and
pressing downward.
WARNING: When cleaning the filters, don't knock on them. Otherwise, the filters could be contorted and the
performance of dishwasher could be decreased.
NOTE: The entire filter assembly should be cleaned once a week.
Step 1: Contrarotate the filter assembly(A,B and C),
then lift it all up.
Step 2: Lift B and C up from A.
Step 3: Separate B and C.
19