Advertisement
Operation Instruction
Turning On the Appliance
Start a wash cycle
1. Draw out the basket(see the section entitled "Loading the Dishwasher basket" ).
2. Pour in the detergent (see the section entitled " Detergent and Rinse Aid" ).
3. Insert the plug into the socket. The power supply is 220-240 VAC 50 HZ, the specification of the socket
is 10A 250 VAC.
4. Make sure that the water supply is turned on to full pressure.
5. Press the program button, the wash program will be changed as following direction:
lntensive->Heavy->Normal->Glass>1 Hour->Rapid;
If a program is selected, the corresponding light will be on. Then press the
Start/Reset button, the dishwasher begins to start.
Note: When you press the Start/Reset button to pause during washing, the program light will stop blinking
and the dishwasher will sound every minute unless you press the Start/Reset button to start.
Change the Program
You can modify the washing program, If the dishwasher just worked for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water. In
this case, the detergent dispenser must be refilled (see the section entitled11 Detergent 11 ).
Press Start/Reset Button more than three seconds the machine will be in stand
by state ,then you can change the program to the desired cycle setting (see the section entitled II Starting a
wash program ).
The program lights show the status of the dishwasher:
a)
One of the program lights on---------- standby or pause.
b)
One of the program lights blinking----- running.
NOTE: If you open the door during washing, the machine will pause. When you close the door and press
the start/reset Button, the machine will keep on working after 10 seconds.
Forget to Add a Dish?
A forgotten dish can be added any time before the detergent cup opens.
1. Press the Start/Reset button.
2. Open the door a little to stop the washing.
3. After the spray arms stop working, you can open
the door completely.
4. Add forgotten dishes.
5. Close the door.
6. Press the Start/Reset button, the dishwasher will
run after 10 seconds.
16
Advertisement
