Summary of Contents for Home Decorators Collection Mattingly 23MM30583-PC72
Page 1
USE AND CARE GUIDE MATTINGLY ELECTRIC FIREPLACE QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE, CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE 8 A.M. - 7 P.M., EST, MONDAY - FRIDAY, 9 A.M. - 6 P.M., EST, SATURDAY 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators through the purchase of this electric fireplace.
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at service at 1-800-986-3460, 8 a.m.-7 p.m., EST, WARNING: Under no circumstances should this fireplace be Monday-Friday, 9 a.m.
Page 4
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. NOTE: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times.
Pre-Assembly HARDWARE INCLUDED Part Description Part Number Quantity Wood Dowel PH-DWLNTL001 Shelf Pin PH-SPNPCSPLB2 Handle (with Screw) Handle (with Screw) Screw 3 x 16 mm PH-SCRBLK001 Door Hinge PH-HNGBLK003 Screw 4 x 50 mm PH-SCRBLK006 Screw 4 x 15 mm PH-SCRBLK009 Angle Bracket PH-BKTBLK007...
PRODUCT SPECIFICATIONS NOTE: Hardware not shown to actual size. VOLTAGE 120VAC, 60 Hz AMPS 12.5 Amps WATTS 1500 Watts PLANNING ASSEMBLY Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit. Part Description Quantity Base Center Shelf Left Center Panel Right Center Panel Decorative Base Panel Left Side Panel Top Assembly Right Side Panel Side Back Panel Center Back Panel Left Door...
Assembly Preparing the center shelf Preparing the center panels Insert Wood Dowels (AA) into the pre-drilled holes on Align the Door Bumpers (NN) onto the Left Center Panel (C) the sides of the Center Shelf (B). and secure with Screws (JJ). Repeat step for the Right Center Panel (D).
Page 10
Assembly (continued) Preparing the center panels Attaching the decorative base panel Using a Phillips screwdriver, secure the Decorative Insert Wood Dowels (AA) into the previously Base Panel (E) by inserting Washers (MM) and Bolts assembled unit (Step 4). (LL) through the pre-drilled holes in the Base (A). Attaching the base Preparing the side panels Insert Wood Dowels (AA) into the pre-drilled holes in the...
Page 11
Assembly (continued) Attaching the side panels Securing the center shelf Align the Metal Plate (RR) onto the back of the center On a flat surface, secure the Left Side Panel (F) to shelf (B) and secure with a Screw (DD). the Base (A) by inserting Screws (FF) through the Rotate the Metal Plate (RR) to span the joint and secure pre-drilled holes.
Page 12
Assembly (continued) Attaching the top assembly Installing the back panels Insert the Screws (DD) through the pre-drilled holes in Place the Top Assembly (G) on top of the main the Center Back Panel (J) and the Side Back Panels (I). assembly.
Page 13
Assembly (continued) Attaching the sliding doors Attaching the adjustable shelves Align the Left Door (K) with the Door Hinge (EE), latched push the Left Door (K) to the right. Insert the Shelf Pins (BB) into the pre-drilled holes on Insert screws (GG) into the pre-drilled holes. the inside of the Left Side Panel (F) and the Left Center Tighten using a Phillips Screwdriver.
Page 14
Assembly (continued) Installing the tipping restraint hardware When the Tipping Restraint Hardware (KK) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing. Your Unit comes with two Tipping Restraint Hardware (KK).
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. Powering the fireplace Adjusting the flame Push the Power button to supply power to all There are 6 brightness levels that can be selected: functions of the fireplace and put the insert in a standby mode.
Page 16
Operation (continued) Replacing the remote control battery Disposing of used batteries The battery may contain hazardous substances that When the remote control stops operating or its range could endanger the environment and human health. seems reduced, it is time to replace the battery with new ones.
Page 17
Operation (continued) Patent pending Safer Plug™ information SAFER PLUG This product is equipped with a Safer Plug™, which is an advanced safety device that helps detect electrical fires caused from faulty outlets. Overloading of outlets, adapters and surge protectors may cause overheating, damage, and increased risk of fires.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules.
Troubleshooting PROBLEM ROOT CAUSE CORRECTIVE ACTION Unplug the fireplace, remove the back panel of the fireplace and check that the The thermostat sensor is thermostat is plugged into the main circuit Display shows " " broken or disconnected. board. If this does not solve the problem contact customer service for a replacement thermostat sensor.
Page 20
Troubleshooting (continued) PROBLEM ROOT CAUSE CORRECTIVE ACTION Flame effect works but heater With the power on press and hold the POWER function does not and the emberbed button on the control panel for 10 seconds. The heater is disabled. flashes when the Heater button is Once re-enabled the emberbed lights will pressed.
Replacement Parts For replacement parts, call our customer service department at 1-800-986-3460, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty. Remote Control Flame Circuit Board Blue LED Circuit Board Flame Generator Drive Motor Thermostat Sensor Blower / Heater Assembly Control Panel Circuit Board...
Page 22
HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Page 23
HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Page 24
Questions, problems, missing parts? Before returning to the store call Home Decorators Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS RETAIN THIS MANUAL FOR FUTURE USE.
Need help?
Do you have a question about the Mattingly 23MM30583-PC72 and is the answer not in the manual?
Questions and answers