Table of Contents
Advertisement
Suunto EON Steel
NOTE: When diving in CCR mode, deepstop is on by default, and it cannot be turned off.
4.16.4. Gauge mode
Use Suunto EON Steel as a bottom timer with Gauge mode.
The timer in the top right of the display shows dive time in minutes and seconds and can be
activated and stopped by short pressing the upper button. Keep the upper button pressed to
reset timer.
NOTE: Gauge mode is a bottom timer only and thus includes no decompression
information or calculations.
Gauge mode has two views by default:
Timer
•
Compass
•
A third view is visible after cutomizing with DM5:
Tank Pressure - For more information on what is shown on the display, see 4.36. Tank
•
pressure .
NOTE: After diving in gauge mode, decompression calculation is locked for 48 hours. If
during this time you dive again, there is no decompression calculation available and Locked
is shown in decompression information fields.
4.17. Dive planner
The dive planner in Suunto EON Steel helps you to quickly plan your next dive. The planner
displays available no decompression time and gas times for your dive based on depth, tank
size and gas consumption set.
30
Advertisement
Table of Contents
