Suunto EON Steel
3. Keep the upper button pressed to reset the timer.
Timer start and stop actions are saved to the dive log.
4.38. Water contacts
Suunto EON Steel switches to dive state when water is detected. Dive starts
when the water contact is on, at 1.2 m (4 ft), or
•
when the water contact is not on, at 3.0 m (9.8 ft)
•
and ends
•
when the water contact is on and your depth is less than 1.2 m (3.9 ft), or
when the water contact is not on and your depth is at 3.0 m (9.8 ft).
•
When water contact is active, the color of the depth reading digits turns white.
45