Suunto EON STEEL 2.5 User Manual page 48

Suunto EON Steel
2. Make sure the Tank POD has been activated by ensuring there is tank pressure reading
on screen and Tank POD green led is blinking. In the menu, the Tank POD is identified by
the serial number printed on the Tank POD.
In the dive main views, only one tank pressure is shown and corresponds to the active gas.
When the gas is changed, the displayed tank pressure is also changed accordingly.
WARNING: If there are several divers using Tank PODs, always check before you dive
that the POD number of your selected gas corresponds to the serial number on your POD.
NOTE: You can find the serial number on the metal base and also on the cover of the
Tank POD.
TIP: Remove pressure from the Tank POD when not diving to save battery life.
To unpair and remove your Tank POD from a specific gas using proximity:
1. Hold your Tank POD close to your dive computer in Tank pressure view:
2. Scroll to the gas you want to remove your Tank POD from:
3. Select Unpair:
4. Your Tank POD is removed from the selected gas list:
48