ZIPPER MASCHINEN ZI-STB13T User Manual page 20

 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid slippery floor.
 Make sure the work area is lighted sufficiently
 Work only in a well ventilated area
 Do not overload the machine
 Provide good stability and keep balance all times
 Avoid abnormal working postures! Make sure you stand squarely and keep balance at all times.
 Keep away from the running drill!
 Always stay focused when working. Reduce distortion sources in your working environment. The
operation of the machine when being tired, as well as under the influence of alcohol, drugs or
concentration influencing medicaments is forbidden.
 Do not climb onto the machine!
 Attach the machine to the underground.
 Only one person shall operate the machine.
 The machine must be operated only by trained persons (knowledge and understanding of this
manual), which have no limitations of motor skills compared with conventional workers.
 Do not allow other people, particularly children, to touch the machine or the cable. Keep them
away from your work area.
 Make your workshop childproof.
 Make sure there is nobody present in the dangerous area. The minimum safety distance is 2 m
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might be caught and
cause severe accidents!
 Wear a hair net if you have long hair.
 Loose objects can become entangled and cause serious injuries!
 Use personal protective equipment. Always wear eye protection. Protective equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries. Operation with gloves forbidden
 Never leave the machine running unattended! Before leaving the working area switch the machine
off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
 The plug of an electrical tool must strictly correspond to the socket. Do not use any adapters
together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There is a risk of
electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and gases (danger of
explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables suitable for outdoor use
 Do not use the cable to carry the machine or to fix the work piece
 Protect the cable from heat, oil and sharp edges
 Avoid body contact with earthed components
 Before starting the machine remove any adjusting wrenches and screwdrivers
 Use a clip or clamping jaws to secure the workpiece
 Do not fix the workpiece with your hands
 Rotating parts can cause severe cut injuries
 Keep the drills sharp and clean, so they get stuck less often and are easier to guide
 Keep any machine that is not being used out of reach of children
 Any repairs must only be carried out by the authorized service agent.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-STB13T
SAFETY
20