Memory Problems - Dell Studio 1737 Setup Manual

not be responding. Press the power button until
the computer turns off and then turn it back on.
If the problem persists, see the Dell Technology
Guide on the Dell Support website at support.
dell.com.
If the power light is blinking white — The
computer is in standby mode. Press a key on
the keyboard, move the pointer using the touch
pad or a connected mouse, or press the power
button to resume normal operation.
If you encounter interference that hinders
reception on your computer — An unwanted
signal is creating interference by interrupting or
blocking other signals. Some possible causes of
interference are:
• Power, keyboard, and mouse extension
cables.
• Too many devices connected to a power
strip.
• Multiple power strips connected to the same
electrical outlet.

Memory Problems

If you receive an insufficient memory
message—
• Save and close any open files and exit any
open programs you are not using to see if
that resolves the problem.
• See the software documentation for
minimum memory requirements. If
necessary, install additional memory
(See the Service Manual on the Dell Support
website at support.dell.com).
• Reseat the memory modules (See the
Service Manual on the Dell Support website
at support.dell.com) to ensure that your
computer is successfully communicating
with the memory.
If you experience other memory problems —
• Ensure that you are following the memory
installation guidelines (see the Service
Manual on the Dell Support website at
support.dell.com).
Solving Problems
35