Dell Studio 1737 Setup Manual page 41

Dell studio 1737: quick start
Hide thumbs Also See for Studio 1737:
Table of Contents

Advertisement

system or the program that was running
when the message appeared. Alternatively
you could see the Dell Technology Guide
on your computer or on the Dell Support
website at support.dell.com or see
"Contacting Dell" on page 55 for assistance.
Alert! Previous attempts at booting this system
have failed at checkpoint [nnnn]. For help
in resolving this problem, please note this
checkpoint and contact Dell Technical
Support — The computer failed to complete
the boot routine three consecutive times for the
same error see "Contacting Dell" on page 55 for
assistance.
CMOS checksum error — Possible motherboard
failure or RTC battery low. Replace the battery.
See the Service Manual on the Dell Support
website at support.dell.com or see "Contacting
Dell" on page 55 for assistance.
CPU fan failure — CPU fan has failed. Replace
the CPU fan. See the Service Manual on the Dell
Support website at support.dell.com.
Hard-disk drive failure — Possible hard disk
drive failure during HDD POST see "Contacting
Dell" on page 55 for assistance.
Hard-disk drive read failure — Possible hard
disk drive failure during HDD boot test see
"Contacting Dell" on page 55 for assistance.
Keyboard failure — Keyboard failure or loose
cable.
No boot device available — No bootable
partition on hard disk drive, the hard disk drive
cable is loose, or no bootable device exists.
If the hard drive is your boot device, ensure
that the cables are connected and that the
drive is installed properly and partitioned as
a boot device.
Enter system setup and ensure that the boot
sequence information is correct (see Dell
Technology Guide on your computer or on the
Dell Support website at support.dell.com).
Using Support Tools
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio pp31l

Table of Contents