Infrared; Figure 2-2. Peripherals Menu Of Setup Program; Table 2-1. Serial Port Mappings - Dell Latitude LM Reference And Troubleshooting Manual

PhoenixBIOS Setup — Copyright 1985-95 Phoenix Technologies Ltd.
Main Peripherals Security Power Exit
Integrated Peripherals
Serial Port:

Infrared:

Parallel Mode:
Diskette Mode:
Video Mode:
Touch Pad:
CD-ROM Drive Speed:
F1 Help Select Item
ESC Exit Select Menu

Figure 2-2. Peripherals Menu of Setup Program

Table 2-1. Serial Port Mappings

If serial port
is set to: Infrared port can be set to:
COM1 COM2 or COM4
(COM1 and COM3 are illegal
configurations.)
COM2 COM1 or COM3
(COM2 and COM4 are illegal
configurations.)
COM3 COM2 or COM4
(COM1 and COM3 are illegal
configurations.)
COM4 COM1 or COM3
(COM2 and COM4 are illegal
configurations.)
[COM 1]
[Disabled]
[Bi-Directional]
[No Reboot]
[Simul Mode]
[Enabled]
[High Performance]
-/+ Change Values
Enter Select Sub-Menu
Infrared
INFRARED
avoid address conflicts with other devices. The default
setting is
COM2
If you are using Windows 95 and this option is set to
AUTO
cally to avoid address conflicts with other devices. If any
other setting is used, this automatic mapping does not
occur.
If you are using Windows 3.x set this option to
set the
COM4
When mapping the infrared port, be careful not to create
a conflict with the serial port. Table 2-2 shows the avail-
able infrared port mappings.
Item Specific Help
F10 Previous Values
lets you map the address of the infrared port to
. Other possible settings are
DISABLED
, , , and
COM3 COM4 AUTO
, the operating system can remap the port automati-
option to
SERIAL PORT
.
Customizing System Features
F9 Setup Defaults
,
COM1
.
, and
COM3
, , or
DISABLED COM2
2-5