Philips 7000 Series User Manual page 56

4 Slowly move the trimming head around
inside each nostril, making sure the side
of the tip is held firmly against the skin.
This reduces the tickling effect that can
occur.
5 Switch off the appliance and clean the
attachment after use.
Dried nasal mucus can block the cutting
element, preventing the appliance from
switching on. If the cutting element is
blocked, clean the attachment
(see 'How do I clean my appliance and the
attachments?').
Trimming ear hair
Make sure your outer ear channels are clean
and free from wax.
1 Switch on the appliance.
2 Slowly move the trimming head along the
rim of the ear to remove hairs that stick
out beyond the rim.
3 Carefully insert the trimming head into
the outer ear channel.
Do not insert the trimming head more
than 0.5 cm into your ear channel, as this
could damage the eardrum.
4 Slowly turn the trimming head around
to remove all unwanted hairs from your
outer ear channel.
5 Switch off the appliance and clean the
attachment after use.
55
English