Charging With The Supply Unit - Philips 7000 Series User Manual

English

Charging with the supply unit

1 Make sure that the appliance is switched
off.
2 Insert the small plug into the appliance
and put the supply unit in the wall socket.
- While the appliance is in quick charge
mode, the lights of the battery status
indicator light up one after the other.
After approximately 5 minutes, the
bottom light of the battery status
indicator flashes. The battery now
contains enough energy for one shave.
- While the appliance charges, first the
bottom light of the battery status
indicator flashes and then lights
up continuously. Next the second
light flashes and then lights up
continuously, and so on until the
appliance is fully charged.
- When the appliance is fully charged, all
three battery indicator lights light up
continuously. After approx. 30 minutes,
the light goes out automatically.
3 After charging, remove the supply unit
from the wall socket and pull the small
plug out of the appliance.
46