Philips 7000 Series User Manual page 60

Cleaning the pop-up trimmer
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the
shaving unit. For detailed instructions, see
'How do I replace the shaving heads?.'
8 Insert the hinge of the shaving head
holder into the slot in the top of the
shaving unit and close the shaving unit.
Clean the trimmer after each use to prevent
clogging and damage.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.
1 Make sure that the appliance is switched
off and disconnected from the wall
socket.
2 Push the trimmer release slide down to
open the pop-up trimmer.
3 Switch on the appliance and rinse the
pop-up trimmer with warm water.
4 After cleaning, switch off the appliance.
5 Carefully shake off excess water and let
the pop-up trimmer air dry.
6 Close the trimmer.
59
English