Contents 5 Product speci�cations 1 Important safety instructions Safety 6 Troubleshooting Care for your product Care of the environment 7 Trademarks Declaration of conformity Help and support FCC and IC information 2 Your soundbar What’s in the box Main unit Connectors Wireless subwoofer Surround speaker...
1 Important Risk of short circuit or �re! • For identi�cation and supply ratings, see safety the type plate at the back or bottom of the product. instructions • Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product.
Help and support Disposal of your old product and battery For extensive online support, visit Your product is designed and manufactured with high quality www.philips.com/support to: materials and components, which • download the user manual and the can be recycled and reused.
• �nd answers to frequently answered FCC&IC Warning: questions (FAQs) • email us a question • This equipment should be installed and • chat with our support representative. operated with minimum distance 20cm Follow the instructions on the website to between the radiator &...
• Images, illustrations and drawings Congratulations on your purchase, and shown on this User Manual are for welcome to Philips! To fully bene�tt reference only, actual product may vary from the support that Philips in appearance. offers,register your soundbar at www.philips.com/support.
Connectors This section includes an overview of the connectors available on your soundbar. Pair ① AC in Connect to the power supply. Connector to surround speaker ② Connect to surround speaker. ③ Subwoofer indicator 1 2 3 4 Determine the status based on the wireless subwoofer indicator.
(Sound mode) Remote control Select from the three sound modes: BASS, TREB (treble), AV SYNC (Audio This section includes an overview of the Delay). remote control. (Back) (Standby-On) button ① Back to previous level. Switch the soundbar On or to standby. (Source) ②...
• Do not place the remote control on a Replace the remote control battery wet object. • Do not place the remote control under Slide to remove the battery compartment direct sunlight or near sources of cover, insert 2 AAA batteries (1.5V) with excessive heat.
Wall mount Note ~50mm/2.0" 600mm / 23.62” • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. 2.5-3mm/0.09-0.12” • Before wall mounting, make sure the wall can support the weight of your soundbar. 4mm/ •...
3 Connect Note • The Dolby Audio-Dolby Digital Plus experience is only available when the soundbar is connected to the HDMI-ARC source via a HDMI cable above This section helps you connect your 1.4. soundbar to a TV and other devices, and •...
HDMI in • Use an RCA to 3.5mm audio cable to Note connect the TV’s audio output sockets HDMI out (eARC) • Your TV must support the HDMI-CEC and ARC to the AUX socket on the unit. function. HDMI-CEC and ARC must be set to On. •...
Pair up with the subwoofer Then press on the soundbar or remote control to switch the soundbar ON. Automatic pairing The indicator on the subwoofer Plug the soundbar and the subwoofer into will become solid when successful. the mains sockets and then press on the unit or remote control to switch the unit to If the indicator still keeps blinking,...
Use your Select equalizer (EQ) effect soundbar Select prede�ned EQ effects to suit you video or music. Press the EQ button on the remote control This section helps you use the soundbar to to select your desired preset equalizer play audio from connected devices. effects.
Settings menu Set display brightness. HIGH, MID, LOW • settings to provide you with an even better By default, the dimmer is set to experience. MID. Button Function By default, the Bass/Treble level is set to 0. Enter settings menu Navigate up/down in menu AURST (Audio Reset) structure.
Page 16
Bass/Treble AV SYNC Set the Audio Delay. Adjust the low frequency (bass) and high frequency (treble) settings of this Video image processing is sometimes product. longer than the time required to process the audio signal. This is called “delayed.” BAS -5 ... BAS +5 •...
Bluetooth, search for and select such as wall, metallic casing that covers the Philips TAB7568 to start connection device, or other devices nearby that operate in (see the user manual of the Bluetooth the same frequency.
USB operation AUX / Optical / HDMI ARC operation Enjoy audio on a USB storage device, such as an MP3 player and USB �ash memory, etc. Ensure that the unit is connected to the TV or audio device. 1 Insert the USB device. 1 Press the button repeatedly on the unit or on the remote to select...
5 Product Standby power < 0.5 W consumption speci�cations Frequency response 35Hz - 150Hz Impedance Dimensions (W x H x D) 160 x 232 x 277 mm Note • Speci�cations and design are subject to Weight 3.35 kg change without notice. Operating temperature 0°C - 40°C Bluetooth Surround speaker...
If you play audio from TV through this before you request service. If you still product, make sure that the TV is have a problem, get support at muted. www.philips.com/support. No sound from the wireless subwoofer. Main unit • Manually connect the subwoofer to the main unit.
Page 21
No sound from the surround speaker. Remote control does not work. • Unplug the RCA cable between your • Before you press any playback control surround speakers and your button, �rst select the correct source. subwoofer. Con�rm your subwoofer • Reduce the distance between the works and has sound, with the remote control and the unit.
7 Trademarks The Adopted Trademarks HDMI, HDMI High-De�nition Multimedia Interface, HDMI Roku, the Roku logo, Roku TV, Roku TV Ready, trade dress and the HDMI Logos are trademarks and the Roku TV Ready logo are trademarks or registered trademarks of HDMI Licensing and/or registered trademarks of Roku, Inc.
Page 23
Speci�cations are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD...
Need help?
Do you have a question about the 7000 Series and is the answer not in the manual?
Questions and answers