Video And Display Problems; If The Display Is Blank - Dell Inspiron 1100 Owner's Manual

N
O T E N O U G H M E M O R Y O R R E S O U R C E S
— You have too many programs open. Close all windows and open
T R Y A G A I N
the program that you want to use.
O
P E R A T I N G S Y S T E M N O T F O U N D
A .DLL
R E Q U I R E D F I L E W A S N O T F O U N D
trying to open is missing an essential file. Remove and then reinstall the program.
Click the Start button.
1
Click Control Panel.
2
Click Add or Remove Programs.
3
Select the program you want to remove.
4
Click Remove or Change/Remove and follow the prompts on the screen.
5
See the program documentation for installation instructions.
6
:\
X I S N O T A C C E S S I B L E
into the drive and try again.

Video and Display Problems

If the display is blank

C
H E C K T H E L I G H T
has power.
• If the light is blinking, the computer is in standby mode—press the
power button to exit standby mode.
• If the light is off, press the power button.
• If the light is on, your power management settings may have caused the
display to turn off. Try pressing any key or move the cursor to exit standby
mode.
C
H E C K T H E B A T T E R Y
the battery charge may be depleted. Connect the computer to an electrical outlet
using the AC adapter, and turn on the computer.
. E
X I T S O M E P R O G R A M S A N D
— Contact Dell (see page 126).
— The program that you are
. T
H E D E V I C E I S N O T R E A D Y
— When the
light is blinking, the computer
— If you are using a battery to power your computer,
— Insert a disk
NOTE: If you are using a
program that requires a
higher resolution than
your computer supports,
it is recommended that
you attach an external
monitor to your computer.
So l vi n g Pro b l em s
81