Touch Pad Or Mouse Problems; Video And Display Problems; If The Display Is Blank; If The Display Is Difficult To Read - Dell latitude X1 User Manual

Touch Pad or Mouse Problems
Check the touch pad settings —
1. Click the Start button, click Control Panel, and then click Printers and Other Hardware.
2. Click Mouse.
3. Try adjusting the settings.
Check the mouse cable —
If you are using a mouse extension cable, disconnect it and connect the mouse directly to the computer.
To verify that the problem is with the mouse, check the touch pad —
1. Shut down the computer.
2. Disconnect the mouse.
3. Turn on the computer.
4. At the Windows desktop, use the touch pad to move the cursor around, select an icon, and open it.
If the touch pad operates correctly, the mouse may be defective.
Check the system setup program settings —
(The computer automatically recognizes a USB mouse without making any setting adjustments.)
Test the mouse controller —
buttons, run the Mouse test in the Pointing Devices test group in the
Reinstall the touch pad driver —
Video and Display Problems
Fill out the Diagnostics Checklist
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

If the display is blank

NOTE: If you are using a program that requires a higher resolution than your computer supports, it is recommended that you attach an external monitor
to your computer.
Check the battery —
electrical outlet using the AC adapter, and turn on the computer.
Test the electrical outlet —
Check the AC adapter —
Connect the computer directly to an electrical outlet —
that the computer turns on.
Adjust the power properties —
Switch the video image —

If the display is difficult to read

Downloaded from LpManual.com Manuals
Shut down the computer. Disconnect the mouse cable, check it for damage, and firmly reconnect the cable.
Verify that the system setup program lists the correct device for the pointing device option.
To test the mouse controller (which affects pointer movement) and the operation of the touch pad or mouse
See "Reinstalling Drivers and
as you complete these checks.
If you are using a battery to power your computer, the battery charge may be depleted. Connect the computer to an
Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light is on.
Bypass power protection devices, power strips, and the extension cable to verify
Search for the keyword standby in the Windows Help and Support Center.
If your computer is attached to an external monitor, press <Fn><F8> to switch the video image to the display.
Using the Dell Diagnostics.
Utilities."