Video Tutorial; Requirements; Identifying Phone Model; Phone Firmware - Yealink SIP-T43U Configuration Manual

This Configuration Guide is written as a general guide on how to configure the Yealink phone
model SIP-T43U to work with PBXware 5.3.6.

Video Tutorial

Please refer to the video tutorial explaining the Auto Provisioning setup for the Yealink Phone on
PBXware 5.

Requirements

Identifying Phone Model

To start and successfully complete registration of your Yealink phone you need to know which
phone model to set up.
On the back of each Yealink phone, there is model information that you should check. Although
various phone models can have exactly the same requirements and installation procedures,
phone models can also have significantly different requirements and installation procedures, so
that is why it is important to know the model you own which results in you setting up the device
successfully.

Phone Firmware

Make sure that your phone is loaded with an appropriate firmware version, 108.84.0.30.
To find out the firmware version of your Yealink phone model, open a new browser window
and enter your phone IP address in order to access the phone's web administration interface