Removing The Control Panel - Dell Precision 530 Service Manual

94

Removing the Control Panel

CAUTION: Before you perform this procedure, see
For You and Your
NOTICE: Before disconnecting a device from the computer or removing a
component from the system board, verify that the standby power light on the
system board has turned off. To locate this light, see
Components."
Turn off the computer and devices, disconnect them from their
1
electrical outlets, wait at least 10 to 20 seconds, lay the computer on its
right side, and open the computer
Remove the front
2
Disconnect the control-panel cable from the I/O panel connector.
3
Disconnect the I/O panel cable from the connector on the system
4
board. To locate the system board connector, see
Components."
Remove the mounting screw from the control panel.
5
Lift the control panel away from the chassis.
6
Computer."
cover.
panel.
"Safety First—
"System Board
"System Board