Dell Precision 530 Service Manual page 125

Slide the TEM pan toward the back of the computer and press the two
2
green TEM pan release tabs into their securing slots.
This locks the TEM pan into position.
NOTICE:
Replace the TEM pan screw.
3
NOTE: Replacing the TEM pan screw is optional. To avoid damage to the
system board, Dell strongly recommends that you replace the TEM pan screw
before traveling with or shipping the computer.
Replace all components on the system board by performing
4
through step 8 of "Removing the System
Set the jumpers on the new system board so that they are identical to
5
those on the original board.
Close the computer cover
6
Run system setup to ensure that your settings are correct and that all
7
system board components are correctly identified.
Run the Dell Diagnostics to verify that the computer is operating
8
properly.
Board" in reverse.
and restart the computer.
step 3
125