Replacing The System Board - Dell Precision 530 Service Manual

TEM pan screw
green TEM pan
release tabs (2)
gray metal tabs (2)
124
R e m o v i n g t h e S y s t e m B o a r d
Press down on the two gray metal chassis tabs, lift the two green TEM
10
pan release tabs, and slide the TEM pan toward the front of the
computer.
The TEM pan and system board are removed as one unit.
Reach under the TEM pan near the release tabs, and carefully lift the
11
TEM pan out of the chassis at an angle.

Replacing the System Board

The TEM pan and system board are replaced as one unit.
NOTICE: Do not twist the TEM pan or system board as you position it in the
chassis.
Lower the TEM pan into the chassis at an angle, with the I/O panel
1
connectors lowered into the chassis first.
back panel
I/O panel
connectors
system board