Autoglide CABRI-30P User Manual
  1. Manuals
  2. Brands
  3. Autoglide Manuals
  4. Gate Opener
  5. CABRI-30P
  6. User manual

Autoglide CABRI-30P User Manual

Automatic gate opening system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTIONS CABRI-30P/35P
SWING GATE OPENER
Page1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CABRI-30P and is the answer not in the manual?

Questions and answers

Related Manuals for Autoglide CABRI-30P

Summary of Contents for Autoglide CABRI-30P

  • Page 1 INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page1...
  • Page 2 Sw1 Dip Switch Setting Applications Description of the Automation. 4.1.1 Slowing Down Adjustment Description of Devices 4.1.2 Over-Current Adjustment 1.3.1 CABRI-30P/35P Electromechanical 4.1.3 Gate Auto Close Adjustment Gear Motors 1.3.2 Control Box 4.1.4 Pedestrian Mode Adjustment 1.3.3 Photocells 4.1.5 Flashing Light Adjustment 1.3.4 Radio Transmitter...
  • Page 3 Keep all the components of CABRI-30P/35P system and this manual for further consultation • Be aware of the hazards that may exist in the procedures of installation and operation of the gate-automated system.

  • Page 4: Product Description And Applications

    1.1 Applications CABRI-30P/35P is applied for residential automation of single or dual leaf gate. CABRI-30P/35P has to be operated with electricity and it’s forbidden to be operated by back-up batteries for normal use. Back-up batteries are only allowed for emergent operation when there is a power failure, and the gear motors can be released by special keys to move the gate manually.

  • Page 5: Control Box

    Control box consists of one control panel with incorporated receiver and one transformer. Provides the complete automation of the gear motors and other accessories of CABRI-30P/35P kit. To connect separate terminals on the control panel and activate the gear motors and other accessories, the installation manual has to be carefully read before handling.

  • Page 6: Radio Transmitter

    (A) button is “open-stop-close mode” and (B) button is “pedestrian mode”. 1.3.5 Flashing Light Flashing light is controlled by control box and blinks when the gate is moving. The flashing light stops blinking when the gates finish opening or closing Figure 7 INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page6...

  • Page 7: Installation

    2) Installation: 2.1 Notes of Motors in Operation The CABRI-30P/35P gate openers are applicable to per leaf of 3.5/4 meters in width and 300/350 kg in weight which can be opened up to 110 degrees primarily for residential use; where the performance shall be influenced by the factors such as gate...

  • Page 8: Motors, Components And Its Installation In Illustration

    Please make sure to shut off the power before going installation or maintenance 2.3 Installation 2.3.1 Preparation for Motor Installation CABRI-30P/35P is not applicable to a gate which is inefficient or unsafe, neither to solve the defects due to incorrect installation nor poor maintenance. INSTRUCTIONS CABRI-30P/35P...
  • Page 9 Make sure the weight and dimensions of the gate conform to the operation range of CABRI-30P/35P. Don’t use CABRI-30P/35P if the specifications do not meet the requirements. 2). Make sure the gate structure conform to the criteria of automatic operation and force regulations.
  • Page 10 If the gate is OPENED OUTWARD, please leave at least 70mm between the post brackets and the gate. Figure 13 (Aerial View) Figure 14 (Aerial View) 10) Using the leaf-opening angle as criteria to make sure all criteria in Figure 15 can be met. Figure 15 INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page10...

  • Page 11: Installation Of The Gear Motors

    8mm holes by four on the mounting surface to be installed and fasten up the brackets with screws and washers. 9. Please make sure the front plate is completely installed horizontally. INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page11...
  • Page 12 Figure 23.1 and fasten the motor to the rear plate with bolt and screw as shown in Figure23.2. Figure 23 Figure 23.1 Figure 23.2 INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page12...
  • Page 13 21. Connect the motor power cable as shown in Figure25. 22. Close the gear motor cover by tightening the two screws as shown in Figure26 Figure 25 Figure 26 CABRI-30P/35P INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page13...
  • Page 14 5). Connect the two wires of the light to the PCB terminals and place the wires into the conduit if necessary. See Figure 2.3.3 (5). 6). Tighten the four screws back on the light base. Figure 2.3.3 (6) 7). Replacing the bulb set. See Figure 2.3.3 (7) INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page14...
  • Page 15 3). Ensure there are no obstacles between receiver and transmitter. For optimal efficiency, the receiver and transmitter should be properly aligned. 4). Power-up the photocells and make sure the LED light on receiver and transmitter are ON Figure 2.3.4(1) Figure 2.3.4(2) Figure 2.3.4(3) INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page15...
  • Page 16 Figure 2.3.5(3) 2. Electric Latch. (If the gate is opened outward) If the gate is opened outward, please change the spring inside and screw it in the different place. See Figure 2.3.5(4), Figure2.3.5(5), Figure2.3.5(6), Figure2.3.5(7) INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page16...
  • Page 17 ). Weld the back plate of the electric latch to the surface on the master gate. See Figure 2.3.5(8). Please avoid melting the wires by the heat of the fixed plate Figure 2.3.5(8) Figure 2.3.5(9) For the gate opened inward For the gate opened outward INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page17...
  • Page 18 2. Remove the cover by unscrewing the four screws on the cover. Figure 1(1). 3. Use a screwdriver to puncture the holes beneath the bottom of the control box. Figure 1(2). 4. Secure it on the wall. Figure 1(3). Figure 1(1) Figure 1(2) Figure 1(3) INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page18...
  • Page 19 Photocell, SW3 setting as below: 3. Ph_conn1 > OFF and 4. Ph_conn2 > OFF No Photocell has been installed, SW3 setting as below: 3. Ph_conn1 > ON and 4. Ph_conn2 > ON INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page19...
  • Page 20 Figure 1(4) INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page20...

  • Page 21: Sw1 Dip Switch Setting

    Current (Amp) Dip Switch 2 OFF Dip Switch 3 OFF Dip Switch 2 OFF Dip Switch 3 ON Dip Switch 2 ON Dip Switch 3 OFF Dip Switch 2 ON Dip Switch 3 ON INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page21...
  • Page 22 Photocell-CLOSE Open not allowed No effect FULLY CLOSED FULLY OPENED No effect Reload automatic closing time STOP DURING MOVING Open not allowed Reload automatic closing time CLOSING No effect Open OPENING Close No effect INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page22...
  • Page 23 Close/Open delay of two leaves of gate can be adjusted from 2 to 6 seconds DIP switch Close Delay Open Delay Dip3. Delay 1 Dip4. Delay 2 2 sec 3 sec 2 sec 4 sec 3 sec 5 sec 3 sec 6 sec INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page23...

  • Page 24: Led Indication

    LED3 will be on when the first pair of the photocells are activated. LED 4 Photocells 2 : LED4 will be on when the second pair of the photocells are activated. LED 5 RF Indicator : LED5 will be on when RF signal is received. INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page24...
  • Page 25 Wait for the learning process to be completed without any interruption. A. Dual Gate: Slave Gate Close Master Gate Close → Master Gate Open → → Slave Gate Open → Slave Gate Close → Master Gate Close INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page25...

  • Page 26: Gate Operation

    (C) In gate-opening or gate-closing phase: For safety purpose, the gate stop if encountering obstacles 4.8 Advanced Operation of the transmitter (SW3 Dip1/2 Remote1 & Remote 2) INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page26...

  • Page 27: Troubleshooting

    AC and battery terminals. The gear motors does not run and the relay Check if the fuse is burned. is noisy when operating the gate opening and closing INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page27...

  • Page 28: Technical Characteristics

    Operating Temperature -20℃~+50℃ Dimension 844mm * 115mm * 106mm Weight 6.25kg 6.2 Control Box Application For CABRI-30P power supply Main power supply 230Vac/110Vac, 50Hz/60Hz Back-up battery 2pcs of batteries for emergency operation, 1.2A each Transformer 4.2A, 24V Receiver board 433.92MHz; 200 transmitters memory...
  • Page 29 6.6 Electric Latch Application For locking the gate. Power Supply 24Vdc Operating Temperature -20℃~+50℃ Operating Current Dimension 61mm * 55mm * 120mm Proprietary Intellectual Property, Do not Distribute without authorization. All rights Reserved- Copyright@2015 Autoglide. www.autoglideglobal.com INSTRUCTIONS CABRI-30P/35P SWING GATE OPENER Page29...

This manual is also suitable for:

Cabri-35p

Table of Contents