Table of Contents
Advertisement
Fire and Explosion Hazard
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result
in fire or explosion and serious injury.
•
The system is for use with water-based materials only. Only use fluids compatible with the
equipment. Refer to Technical Data of all equipment manuals. Read fluid and solvent manufacturers
warnings.
•
Ground the equipment. See Grounding and Electrical Requirements, page 5.
•
If there is any static sparking or you feel an electric shock while using this equipment, stop spraying
immediately. Do not use the equipment until you identify and correct the equipment until you identify
and correct the problem.
•
Keep work area free of debris, including solvent, rags and gasoline.
•
Comply with all applicable state and national fire, electrical and safety regulations.
Equipment Misuse Hazard
Equipment misuse can cause equipment to rupture, malfunction, or start unexpectedly and cause
serious injury.
•
Before operating this equipment, read all manuals, tags, and labels including material labels and
instructions.
•
Do not expose system to rain. Always store system indoors.
•
Do not alter or modify equipment.
•
Do not spray cementitious materials.
•
Do not exceed maximum working pressure of lowest rated component in your system.
•
Check equipment daily. Repair or replace worn or damaged parts immediately.
•
To reduce risk of serious injury, including electric shock and splashing fluid in eyes, follow Pressure
Relief Procedure on page 5 before servicing the unit.
•
Do not use hoses to pull equipment.
•
Route hoses away from traffic areas, sharp edges, moving parts and hot surfaces.
•
Do not expose Graco hoses to temperatures above 130°F (55°C) or below -35°F (-37°C).Store haz-
ardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and
national guidelines.
•
Never directly inhale compressed air. Compressed air may contain toxic vapors.
2
WARNINGS
309863A
Advertisement
Table of Contents
