Usb Printer - Dell Dimension 4400 Owner's Manual

Attach the parallel printer cable to the parallel connector on the
2
computer and tighten the two screws. Attach the cable to the parallel
connector on the printer and snap the two clips into the two notches.
screws (2)
parallel printer
cable
Turn on the printer and then turn on the computer. If the Add New
3
Hardware Wizard window appears, click Cancel.
Install the printer driver if necessary (see "Installing the Printer Driver"
4
on page 18).

USB Printer

Follow the instructions that came with the USB printer to connect it to the
computer. If no information is provided, then follow the instructions in this
section.
Install the printer driver if necessary (see the following section).
1
Attach the USB printer cable to the USB connector on the computer
2
and the printer. The USB connectors only fit one way.
parallel connector
on computer
parallel connector
on printer
notches (2)
clips (2)
HINT:
USB devices while the
computer is turned on.
Setting Up
You can connect
17