Table of Contents
Advertisement
Figure 3
10/100/1000BASE-T Port Pin Out
1000BASE-X (SFP) Ports
The W-7205 controller is equipped with four 1000BASE-X dual-media ports for fiber connectivity only and are
intended for use with SFPs (mini-GBICs).
Dual-Media Port LEDs
Each port is equipped with two LEDs that allow basic monitoring of status, activity, and configuration of the port.
LINK/ACT— Placed above the port to the left, this LED displays the link status and activity of the port.
l
STATUS— Placed above the port to the right, this LED displays the status of the port. The information
l
displayed by this LED changes based on the LCD mode. The LED behavior corresponding to each LCD mode
is listed in
Table 5
Table 5:
10/100/1000BASE-T Port LEDs
LED
LINK/ACT
STATUS
Table 6:
1000BASE-X Port LEDs
LED
LINK/ACT
12 | W-7205 Controller
and
Table
6.
Function
LCD Mode
Link status
Link status
Port status
Administrative
Duplex
Speed
Function
LCD Mode
Link status
Link status
Indicator
Status
Green (Solid)
Link established
Green (Blinking)
Port is transmitting or receiving data
Off
No link
Green (Solid)
Port enabled
Off
Port administratively disabled
Green (Solid)
Full-duplex
Off
Half-duplex
Green (Solid)
1000 Mbps
Off
10/100 Mbps
Indicator
Status
Green (Solid)
Link established
Green (Blinking)
Port is transmitting or receiving data
Off
No link
Dell Networking W-7205 Controller | Installation Guide
Advertisement
Table of Contents
