Figure 10
Mid-Mount Rack Installation
NOTE: Leave a minimum of 10 cm (4 inches) of space on the left and right side of the controller for proper air flow and ventilation.
Leave additional space in the front and the back of the controller to access network cables, LED status indicators, and power cord.
Table or Shelf Installation
Required Tools and Equipment
Rubber feet (included in the package)
l
Installation Steps
1. Attach the rubber feet to the bottom of the controller (see
2. Place the controller on the desired flat table or shelf.
Figure 11
Attaching Rubber Feet
Wall Mounting
An optional accessory kit (SPR-WL2-MNT, must be purchased separately) is available that allows you to mount the
W-7205 controller to a wall.
Dell Networking W-7205 Controller | Installation Guide
Figure
11).
Installation | 25