Replacing The Filters - Philips AC8686 User Manual

Replacing the filters

Note
• The filters are not washable or
reusable.
• Always turn off the air purifier
and unplug from the electrical
outlet before replacing the
filters.
• Do not clean the filters with a
vacuum.
• If the pre-filter is damaged,
worn or broken, do not use.
Visit www.philips.com/support
or contact the Consumer Care
Center in your country.
Filter alert light
status
A3 displays
on the screen
and the filter
replacement
alert goes on.
Action
Replace the
NanoProtect
filter Pro S3
(FY8197)
1
Turn off the air purifier and
unplug from the power socket.
2
Take out the pre-filters on both
sides of the appliance.
3
Take out the expired filters.
Discard used filters.
Note
• Do not touch the pleated filter
surface, or smell the filter as it
has collected pollutants from
the air.
4
Remove all packaging material of
the new filters.
EN
43