Table of Contents
Advertisement
®
R&S
SMW-K548
1 Preface
1.1 About this Manual
This user manual provides all the information specific to the options R&S SMW-
K548. All general instrument functions and settings common to all applications and
operating modes are described in the main R&S SMW user manual.
The main focus in this manual is on the provided settings and the tasks required to
generate a signal. The following topics are included:
●
Welcome to the Crest Facor Reduction option R&S SMW-K548
Introduction to and getting familiar with the option
●
About the Crest Facor Reduction
Background information on basic terms and principles in the context of the signal
generation
●
Configuration and Settings
A concise description of all functions and settings available to configure signal gen-
eration with their corresponding remote control command
●
Remote Control Commands
Remote commands required to configure and perform signal generation in a
remote environment, sorted by tasks
(Commands required to set up the instrument or to perform common tasks on the
instrument are provided in the R&S SMW user manual)
Programming examples demonstrate the use of many commands and can usually
be executed directly for test purposes
●
List of remote commands
Alphabetical list of all remote commands described in the manual
●
Index
1.2 Documentation Overview
This section provides an overview of the R&S SMW user documentation. Unless speci-
fied otherwise, you find the documents on the R&S SMW product page at:
www.rohde-schwarz.com/manual/smw200a
1.2.1 Getting Started Manual
Introduces the R&S SMW and describes how to set up and start working with the prod-
uct. Includes basic operations, typical measurement examples, and general informa-
tion, e.g. safety instructions, etc. A printed version is delivered with the instrument.
User Manual 1179.0939.02 ─ 01
Preface
Documentation Overview
5
Advertisement
Table of Contents
