R&S SMW-K548 User Manual page 20

®
R&S SMW-K548
Parameters:
<ArbCfrSignalBw>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:CFR:SFReq <ArbCfrStopBFreq>
Sets the stopband frequency of the filter, if
FILTer
quency are filtered out by the lowpass filter.
Parameters:
<ArbCfrStopBFreq>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:CFR:WAVeform:CREate <CreateWvFile>
With enabled signal generation, triggers the instrument to store the current settings in a
waveform file. Waveform files can be further processed.
The filename and the directory it is stored in are user-definable; the predefined file
extension for waveform files is *.wv.
Setting parameters:
<CreateWvFile>
Example:
Usage:
Manual operation:
User Manual 1179.0939.02 ─ 01
float
Range:
Increment: 0.1
*RST:
See Example "Configuring the CFR"
See "Signal Bandwidth"
is set to ENHanced. Frequency components higher than the stopband fre-
float
Range:
Increment: 0.1
*RST:
See Example "Setting up an Enhanced Filter"
See "Stopband Freqeuncy"
string
See Example "Configuring the CFR"
Setting only
See "Generate Waveform"
Remote-Control Commands
0 to depends on the sample rate of the loaded file
250E6
on page 13
[:SOURce<hw>]:BB:ARBitrary:CFR:
0 to depends on the sample rate of the loaded file
250E6
on page 14
on page 12
on page 16.
on page 16.
on page 16.
20