Vivo DESK-V201P Instruction Manual page 4

STEP 5
Mount plastic seat bottom (B6) to
assembled chair frame using x4 long
plastic thread screws (A4). Tighten with a
Phillips screwdriver.
STEP 7
Secure seat back using knobs (A5).
STEP 9
Assemble right side drawer slider (B9) to desktop (B8) using x2
short screws (A6) and x2 plastic washers (A3). Tighten with the Allen
wrench (A10). Ensure slider pulls out towards the front of the desk.
4
STEP 6
Slide plastic seat back (B7) onto chair frame,
aligning upper or lower holes in seat back with
screw holes in frame depending on the needed
height.
STEP 8
Adjust chair feet to sit level if needed.