Advertisement
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Place chair legs (B1) into chair feet (B2), making
sure legs are fully seated in openings.
STEP 3
Assemble right side support bar (B3) to leg using
x2 medium screws (A2) and x2 plastic washers
(A3). The support bar has a large hole on the
left side which will face inward. Tighten with the
Allen wrench (A10).
165.3lbs
220.5lbs
(75kg)
(100kg)
CHAIR
DESK
STEP 2
Secure feet using x4 medium screws (A2) and x4
metal lock washers (A1). Tighten with the Allen
wrench (A10).
STEP 4
Slide center support bar (B5) into the large
hole in right side bar. Slide left side support bar
(B4) onto center bar, and secure to legs with x2
medium screws (A2) and x2 plastic washers (A3).
Tighten with the Allen wrench (A10).
TOOLS NEEDED
Phillips
Screwdriver
3
Advertisement
