Related Manuals for Vivo DESK-V201B/G/P
Summary of Contents for Vivo DESK-V201B/G/P
- Page 1 Kids’ Height Adjustable Desk and Chair SKU: DESK-V201B/G/P Instruction Manual Assembly Video & Product Info https://vivo-us.com/products/desk-v201b...
- Page 2 If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 Package Contents B (x4) D (x1) A (x1) C (x1) Foot Left Support Chair Leg Right Support G (x1) E (x1) F (x1) H (x1) Seat Back Straight Seat Bottom Desktop Support L (x2) I (x1) J (x1) K (x1) Left Rail Drawer Desk Leg...
- Page 4 CHAIR ASSEMBLY STEPS STEP 1 Place Chair Leg (A) into Feet (B). Secure Feet to Chair Leg using M6x20mm Screws (S-B), Metal Lock Washers (S-A), and 4mm Allen Wrench (T-A). S-A (x4) S-B (x4)
- Page 5 STEP 2 Secure the Right Support (C) uptop the right side of Chair Leg (A) using M6x20mm Screws (S-B), Plastic Washers (S-C), and 4mm Allen Wrench (T-A). S-C (x2) Assembly Note: Vertical Section of Right Support should overhang the long portion of Foot. S-B (x2) Slide Straight Support (E) into Left and Right Support (C,D).
- Page 6 STEP 3 Place Seat Bottom (F) over Right and Left Supports (C,D). Secure using ST4.8x25mm Screws (S-D) and a Phillips screwdriver. S-D (x4) Slide the Seat Back (G) onto the Right and Left Supports (C,D).
- Page 7 STEP 4 Secure the Seat Back (G) to the Right and Left Supports (C,D) using M6x20mm Screws (S-B) and 4mm Allen Wrench (T-A). If needed, chair can be leveled using pads on Feet (B). S-B (x2)
- Page 8 DESK ASSEMBLY STEPS STEP 1 Press Desk Legs (J) into Feet (B), making sure legs are fully seated in openings. Secure Feet (B) using M6x20mm Screws (S-B) and Metal Lock Washers (S-A). Tighten with 4mm Allen Wrench (T-A). S-A (x4) S-B (x4) STEP 2 Assemble Left Drawer Slider (K) and Right Drawer Slider (L) to Desktop (F) using M6x12mm...
- Page 9 STEP 3 Loosen the knobs on Desktop (F) to lift the top, then tighten the knobs to secure it in place. Press Hook (K) onto Desktop (F) support making sure it is facing out from the desk. Secure Desktop (F) to Desk Legs (H) using M6x40mm Screws (S-F), Plastic Washer (S-C) and 4mm Allen Wrench (T-A).
- Page 10 STEP 4 Extend both slides on Drawer (G) and simultaneously slide them inside of previously installed Left and Right Drawer Sliders (K,L). STEP 5 Level desk by adjusting pads on underside of Feet (B).
- Page 11 ADJUSTING CHAIR & DESK HEIGHT To adjust the chair or desk height, remove the 4 pre-installed screws on Chair and Desk Legs (A,J) using the 4mm Allen Wrench (T-A). Reinstall screws at desired height.
- Page 12 LAST UPDATED: 10/24/2023 REV2L v3.4 Need Help? Get In Touch Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303 Chat live with an agent! FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM VIVO-us @vivo_us...