Advertisement
Quick Links
Kids' Height Adjustable Desk and Chair
Instruction Manual
SKU: DESK-V201B/G/P
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v201b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo DESK-V201B
Summary of Contents for Vivo DESK-V201B
- Page 1 Kids' Height Adjustable Desk and Chair Instruction Manual SKU: DESK-V201B/G/P Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v201b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. -
Page 3: Tools Needed
WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. TOOLS NEEDED Phillips Screwdriver DO NOT EXCEED WEIGHT CAPACITY. 165lbs 220lbs Failure to do so may result in serious injury. (75kg) (100kg) DESK CHAIR ASSEMBLY STEPS STEP 1 Place Chair Legs (A) into Feet (B), making sure legs are fully seated in openings. - Page 4 STEP 2 Assemble Support Tubes (C) to Chair Legs (A) using M6x20mm Screws (S-B) and Plastic Washers (S-C). Tighten with 4mm Allen Wrench (T-A). STEP 3 Secure Chair Bottom (D) to Support Tubes (C) using ST4.8x25mm Screws (S-D). Tighten with a Phillips screwdriver.
- Page 5 STEP 4 Slide Chair Back (E) onto support Tubes (C) and secure using M6x12mm Screws (S-E) and 4mm Allen Wrench (T-A). Level the chair using the pads on the bottom of Feet (B). STEP 5 Place Desk Legs (H) into Feet (B), making sure legs are fully seated in openings. Secure Feet (B) using M6x20mm Screws (S-B) and Metal Lock Washers (S-A).
- Page 6 STEP 6 Assemble Left Drawer Slider (J) and Right Drawer Slider (I) to Desktop (F) using M6x12mm Screws (S-E) and Plastic Washers (S-C). Tighten with 4mm Allen Wrench (T-A). STEP 7 Loosen the knobs on Desktop (F) to lift the top, then tighten the knobs to secure it in place. Press Hook (K) onto Desktop (F) support making sure it is facing out from the desk.
- Page 7 STEP 8 Extend both slides on Drawer (G) and simultaneously slide them inside of Left Drawer Slider (J) and Right Drawer Slider (I). To adjust chair and desk height, remove the 4 pre-installed screws on Chair Legs (A) and Desk Legs (H) using 4mm Allen Wrench (T-A).
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...