Attaching The Mounting Plate - NOMA Mercer 54" Owner's Manual

Note: Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse
!
at the fuse box. Turning power off using the fan switch is
not sufficient to prevent electric shock.
1. Remove 1 of the 3 screws from the mounting ring and loosen the
other 2 screws. Do not remove them.
2. Place the key holes on the mounting plate over the 2 screws
previously loosened from the mounting ring and turn the mounting
plate until it locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws previously loosened
and the one previously removed. (Fig. 12)

Attaching the Mounting Plate

Mounting plate
8
Mounting ring
Screws
Fig. 12