Attaching The Fan Blades - NOMA Schoolhouse 42" Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

1. Attach the blade to the blade bracket using the screws and

fibre washers as shown in Fig. 9.

2. Tighten each screw. Make sure the blade is straight.

3. Unscrew the two blade bracket screws and washers from the motor.

4. Fasten one blade assembly to the motor using the two blade bracket

screws and washers supplied. (Fig.9)

5. Repeat this process with the other blades.

Warning: To reduce the risk of personal injury, do not

bend the blade arms while installing, balancing the

blades, or cleaning the fan. Do not insert foreign objects

between rotating fan blades.

Before starting installation, disconnect the power by

turning off the circuit breaker or removing the fuse at

fuse box. Turning power off using the fan switch is not

sufficient to prevent electric shock.

1. Install one 60 W E12 bulb (not included)

2. Mount the glass shades to the light fixture by unscrewing

partway the thumb screws on the glass holders, inserting the

glass, then gently tightening the thumb screws by hand evenly

to the glass. DO NOT OVER TIGHTEN. (Fig. 10)

3. Attach one pull chain with fob to the chain for the light

and attach one pull chain with fob to the chain for the

slide switch.

4. Restore power and your light kit is ready for operation.