Troubleshooting - Zanussi ZOPNX6K2 User Manual

Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Possible cause
The oven is not connected to an electrical supply
or it is connected incorrectly.
The oven is deactivated.
The clock is not set.
The necessary settings are not set.
The automatic switch-off is activated.
The door is not closed correctly.
The fuse is blown.
The oven Child Lock is on.
30
Before you replace the lamp:
Disconnect the oven from the
The oven does not turn on or does not heat up
Step 2
mains.
Check if the oven is correctly connected to the
electrical supply (refer to the connection diagram
if available).
Activate the oven.
Set the clock.
Make sure that the settings are correct.
Refer to "Automatic switch-off".
Fully close the door.
Make sure that the fuse is the cause of the mal-
function. If the fuse is blown again and again,
contact a qualified electrician.
Refer to "Using the Child Lock".
Step 3
Put a cloth on the bottom of
the cavity.
Remedy