Zanussi ZOPNX6K2 User Manual page 31

Description
The lamp does not operate.
Description
The display shows "C3".
The display shows "F102".
The display shows an error
code that is not in this table.
The display shows "12.00".
Description
Steam and condensation settle
on the food and in the cavity of
the oven.
Problems with components
Possible cause
The lamp is defective.
Display shows:
Possible cause
The cleaning function does not
operate. You did not fully close
the door, or the door lock is
defective.
• You did not fully close the
door.
• The door lock is defective.
There is an electrical fault.
There was a power cut.
Problems with cleaning procedure
Possible cause
You left the dish in the oven for
too long.
Remedy
Replace the lamp.
Remedy
Fully close the door.
• Fully close the door.
• Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows "F102"
again, contact the Custom-
er Care Department.
• Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
Set the clock.
Remedy
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
31